DIY Anti-Inflammatory Charcoal Poultice
by ANASTASIA
Whether you spend a lot of time outdoors or you are in a survival situation, insect bites and small injuries are inevitable.
Unfortunately, some bites can be poisonous and some injuries can develop into serious infections, which is why it’s essential to have something on hand that you can use to quickly heal the affected area.
An anti-inflammatory charcoal poultice is one of the best treatments for these sorts of things. If you have the ingredients, you can make it in minutes. It can help “suck out” the infection, cleanse your wound, and reduce pain.
Activated charcoal is an amazing substance with a lot of uses, so you should already have it on hand if you want to be prepared for any emergency.
In this post, I will show you how to make a simple charcoal poultice, how you can use it, and how you can make activated charcoal yourself.
What Is A Poultice?
A poultice is a thick paste made out of water and healing ingredients, such as charcoal, powders, and herbs.
If you don’t have any herbs, it is a good idea to grow your own. Here is a kit that has everything you need to start your own medicinal garden, so you can later make your own herb poultices and natural remedies.
A poultice can be spread directly onto a cut or an insect bite. It also works well when spread over a clean warm cloth and applied to the affected area, which increases blood flow to the injury and helps promote healing.
Poultices have been around since the dawn of time when people would chew up an herb until it had a paste-like consistency and place it over their wounds.
Anti-Inflammatory Charcoal Poultice
To make the anti-inflammatory charcoal poultice you will need activated charcoal. I recommend purchasing it in bulk and stocking up on it in case of an emergency.
There is a way for you to make activated charcoal yourself, but it’s a lengthy and difficult process (more on that later).
Having activated charcoal on hand in an emergency is always a good idea since it has so many uses. I have a big jar of charcoal capsules that can be taken internally for digestive issues or cracked open and used as the powder for the poultice.
Charcoal Poultice Recipe
Here’s what you will need for this poultice recipe:
- 2 tbsp. activated charcoal powder
- 2 tbsp. flaxseed or flax meal (optional)
- a few tbsp. of clean, warm water
- a clean container to mix these ingredients
- clean cloth or bandage to wrap the poultice over your wound (optional)
The goal here is to create a paste using charcoal. The flaxseed is optional but it helps give the poultice a nice jelly-like texture which makes it easier to apply. However, this recipe will still work without the flaxseed.
This should be enough to cover a large wound or a rash. You can always make less or more, depending on your needs.
Related: 40 Bizarre Home Remedies Our Grandparents Taught Us That Actually Work
Follow these steps to create a poultice:
1. Mix the charcoal powder with equal amounts of flaxseed or flax meal powder. You can omit the flax if you don’t have any on hand.
2. Add clean water one tbsp. at a time slowly mixing with the dry ingredients until it has a paste-like consistency. If you used flax, add a little bit of extra water because it will get absorbed by the flax meal.
3. Wait 10-15 minutes. By this point, your paste should have a nice jelly-like consistency.
4. In the meantime, cleanse the injured area with clean water.
5. Spread the poultice on a clean cloth or bandage and wrap it around the affected area.
Related: My Grandmother’s Favorite Poultice To Treat Infections
If you don’t have a clean bandage, you can apply the poultice directly onto your skin and allow it to dry in place.
6. Allow the poultice to stay in the affected area for at least 30 minutes.
You can re-apply the poultice as needed, making sure to cleanse the area between each application. This will help draw out any infection or toxins that may be in your wound.
⇒ Buy Here A Kit That Has Everything You Need To Start Your Medicinal Herb Garden
Charcoal Poultice Bandages
The poultice can also be made in advance and placed in the freezer for later use. This is a great option that allows you to have a supply of homemade “charcoal bandages” for emergencies.
However, it’s a good idea to also have activated charcoal on hand, in case there is a power outage and your freezer stops working for a longer period of time.
Here’s how I make charcoal bandages:
1. Follow the steps above to create your charcoal poultice, and make a larger amount while maintaining the same proportions. For example you can use ½ cup charcoal powder and flaxseed and mix water into it until it has the right consistency.
2. Spread the poultice over a large sheet of plastic wrap, about ½ inch thick.
3. Place another sheet of plastic wrap over the poultice and use a roller to flatten the poultice in between the sheets.
4. Freeze the plastic-wrapped sheet of poultice.
5. When needed, remove it from the freezer and cut off the amount you need to cover the affected area.
6. Peel off one side of the plastic and stick the poultice directly onto the skin (the cold temperature will be great for reducing pain, too!). You can leave the other side of the plastic on to prevent things from getting messy.
7. If the poultice moves around, you can secure it in place by wrapping a bandage, tape, or some cloth over it.
8. Remove the poultice after about 30 minutes.
Getting Activated Charcoal
As I mentioned previously, activated charcoal is something I recommend stocking up on as part of your survival inventory. Activated charcoal comes in the form of tablets (great for water purification), capsules, or a bag of loose powder.
Whichever option you choose, you’ll be able to use the charcoal for a variety of purposes. However, if you don’t have any activated charcoal, you can try to make it yourself. This is not a quick and easy process, so it’s best to just buy it in advance.
If you need to make it, you can try the following method.
Making Activated Charcoal Yourself
To make activated charcoal, you’ll need to burn some wood and treat the resulting coals with a calcium chloride solution. If you don’t have access to calcium chloride, you can use lemon juice.
Gather your ingredients:
- a large pile of hardwood, chopped up into small pieces
- metal barrel or large metal pot to burn the wood
- calcium chloride (or lemon juice)
- clean water
- medium clean pot
Once you have everything you need, follow the steps below to create activated charcoal.
Note: This process will take several days.
1. Place your hardwood into a large metal container and start a bonfire under the barrel. Allow the hardwood to burn for several hours until the wood turns into blackened coals. This can take 5-8 hours depending on how much wood you have.
2. Allow the coals to cool completely overnight.
3. The next day, grind the coals into a fine powder. You can use a mortar and pestle or a hammer for this.
4. Allow the powder to dry completely. You will likely need to leave it overnight again.
5. While it’s drying, prepare your calcium chloride solution. You will need to use a 1:4 ratio of calcium chloride to water. If you are using lemon juice, adjust the proportions to 1:3 ratio of juice to water.
⇒ Why You Should Have Charcoal Around Your Property
6. Place your dried charcoal powder into a medium-sized clean pot.
7. Pour calcium chloride (or lemon) solution over your charcoal powder, until it has a paste-like consistency. Discard any extra solution.
8. Mix up the paste and let it sit for 24 hours.
9. Carefully drain the liquid out as much as you can and boil the remains in a clean pot over a fire for 3 hours. This will eventually evaporate any remaining liquid, leaving you with a dry powder.
10. Voila, now you have activated charcoal.
You can probably see why it’s easier to buy pre-made activated charcoal, but if you ever need to make it yourself – now you know how!
Knowing how to make a quick poultice can buy you some time before you can treat your cuts or inflammation with more tools.
Poultices can be made with a wide variety of herbs and plants, but due to the versatility of activated charcoal, it’s my material of choice. I always have a charcoal tablet or a baggie of powder in my bag so that I can reach for it in case of an injury or a bite.
Medicinal Garden Kit is created by Dr. Nicole Apelian, who is a mother, a naturalist, a trainer in survival skills, and a Ph.D. holder. Her undergraduate education was in Biology at McGill University, and she continued her herbal studies. Her life was spent among one of the most ancient cultures of the world, the San Bushmen. For the past 20 years, Dr. Nicole has been dealing with her Multiple sclerosis by using natural remedies and medicinal plants she grows in her backyard. She has also survived 57 days all alone in the wild, which was later featured on a History TV channel. Her journey from a wheelchair to living the fullest life. Whenever she has any health issue like headache, body pain, fever, or infection, she turns towards her little backyard pharmacy.
You can get the Medicinal Garden Kit HERE!
Anyone can join.
Anyone can contribute.
Anyone can become informed about their world.
"United We Stand" Click Here To Create Your Personal Citizen Journalist Account Today, Be Sure To Invite Your Friends.
Humic & Fulvic Liquid Trace Mineral Complex
HerbAnomic’s Humic and Fulvic Liquid Trace Mineral Complex is a revolutionary New Humic and Fulvic Acid Complex designed to support your body at the cellular level. Our product has been thoroughly tested by an ISO/IEC Certified Lab for toxins and Heavy metals as well as for trace mineral content. We KNOW we have NO lead, arsenic, mercury, aluminum etc. in our Formula. This Humic & Fulvic Liquid Trace Mineral complex has high trace levels of naturally occurring Humic and Fulvic Acids as well as high trace levels of Zinc, Iron, Magnesium, Molybdenum, Potassium and more. There is a wide range of up to 70 trace minerals which occur naturally in our Complex at varying levels. We Choose to list the 8 substances which occur in higher trace levels on our supplement panel. We don’t claim a high number of minerals as other Humic and Fulvic Supplements do and leave you to guess which elements you’ll be getting. Order Your Humic Fulvic for Your Family by Clicking on this Link , or the Banner Below.
Our Formula is an exceptional value compared to other Humic Fulvic Minerals because...
It’s OXYGENATED
It Always Tests at 9.5+ pH
Preservative and Chemical Free
Allergen Free
Comes From a Pure, Unpolluted, Organic Source
Is an Excellent Source for Trace Minerals
Is From Whole, Prehisoric Plant Based Origin Material With Ionic Minerals and Constituents
Highly Conductive/Full of Extra Electrons
Is a Full Spectrum Complex
Our Humic and Fulvic Liquid Trace Mineral Complex has Minerals, Amino Acids, Poly Electrolytes, Phytochemicals, Polyphenols, Bioflavonoids and Trace Vitamins included with the Humic and Fulvic Acid. Our Source material is high in these constituents, where other manufacturers use inferior materials.
Try Our Humic and Fulvic Liquid Trace Mineral Complex today. Order Yours Today by Following This Link.